Loading...

One moment...

About
Catalogue
100 mtrs Reel 'XPS SPECIAL' fire resistant cable 2 core, 1.5mm square solid core, Red, LPCB approved
100 mtrs Reel 'XPS SPECIAL' fire resistant cable 2 core, 1.5mm square solid core, Red, LPCB approved - Image 2
100 mtrs Reel 'XPS SPECIAL' fire resistant cable 2 core, 1.5mm square solid core, Red, LPCB approved - Image 3
  1. 100 mtrs Reel 'XPS SPECIAL' fire resistant cable 2 core, 1.5mm square solid core, Red, LPCB approved
  2. 100 mtrs Reel 'XPS SPECIAL' fire resistant cable 2 core, 1.5mm square solid core, Red, LPCB approved - Image 2
  3. 100 mtrs Reel 'XPS SPECIAL' fire resistant cable 2 core, 1.5mm square solid core, Red, LPCB approved - Image 3

100 mtrs Reel ‘XPS SPECIAL’ fire resistant cable 2 core, 1.5mm square solid core, Red, LPCB approved

• Made of 2 solid copper conductor cores 1.5mm² each with 0.8mm drain wire, the cable construction is shown in the photo below
• All Context Plus fire resistant cables are approved & certified by LPCB to meet current British and European fire test standards plus the additional life safety requirements provided by Low Smoke & Zero Halogen emission levels.
• Twisted during manufacture to provide the highest level of data protection, ideal for long cable runs and analogue addressable fire systems
• Easy to Install and Superb Working Flexibility
• Up to 12 Twists per metre for Data Protection
• Red and White Outer Sheaths Available
• Supplied in 100m length on a solid plastic Reel. Available also in 500m length.
• Conductors made of ETP1 High grade copper

100m and 500m Reels are available.

Product Code: FSX-215DR Categories: ,

Call Us

All the Context Plus XPS Special fire-resistant cables are certified and approved to the following British and European Standards:

Ref Description
BS 6387 C To comply with this standard the cable must retain continuity for 180 minutes under fire condition at 950 degrees C
BS 6387 W To comply with this standard the cable must retain continuity for 30 minutes under fire condition at 650 degrees C with water spray applied during the final 15 minutes
BS 6387 Z To comply with this standard the cable must retain continuity for 15 minutes under fire condition at 950 degrees C with a mechanical shock applied every 30 seconds during the full 15 minutes test
BS EN 50200 PH30 To comply with this standard a cable must retain continuity for 30 minutes under fire condition at 830 degrees C with a mechanical shock applied every 5 minutes during the full 30 minutes test
BS EN 60332 To comply with this Flame Retardancy Standard a cable must self-extinguish leaving the upper cable sheath unaffected when a flame of 1kw of caloric power is applied for 30 seconds to it. This then demonstrates that the cable does not propagate fire.
BS EN 60754-1:2014 To comply with this Zero Halogen standard a cable must have an Emission of less than 0.5% of corrosive & acid gas when under fire condition
EN 61034-2:2005:+A1:2013 To comply with this Low Smoke standard a cable must be Meeting at least 60% for residual light transmission when under fire condition

Sales Leaflet

View Leaflet

Approval Certificate

View Certificate

Related products

#Context Plus

Follow us on Social Media

Quality Products

Manufacturers of fire alarm systems

100% Satisfaction

Advanced technology of smoke detection

Competitive Prices

Rock bottom prices guaranteed

Global Recognition

We supply to over 70 countries worldwide