100 mtrs Reel ‘XPS SPECIAL’ fire resistant cable 2 core, 2.5mm sq solid core, Red, LPCB approved
• Made of 2 solid copper conductor cores 2.5mm² each with 0.8mm drain wire, the cable construction is shown in the photo below
• All Context Plus fire resistant cables are approved & certified by LPCB to meet current British and European fire test standards plus the additional life safety requirements provided by Low Smoke & Zero Halogen emission levels.
• Twisted during manufacture to provide the highest level of data protection, ideal for long cable runs and analogue addressable fire systems
• Easy to Install and Superb Working Flexibility
• Up to 12 Twists per metre for Data Protection
• Red and White Outer Sheaths Available
• Supplied in 100m length on a solid plastic Reel. Available also in 500m length.
• Conductors made of ETP1 High grade copper
100m and 500m Reels are available.
All the Context Plus XPS Special fire-resistant cables are certified and approved to the following British and European Standards:
| Ref | Description |
|---|---|
| BS 6387 C | To comply with this standard the cable must retain continuity for 180 minutes under fire condition at 950 degrees C |
| BS 6387 W | To comply with this standard the cable must retain continuity for 30 minutes under fire condition at 650 degrees C with water spray applied during the final 15 minutes |
| BS 6387 Z | To comply with this standard the cable must retain continuity for 15 minutes under fire condition at 950 degrees C with a mechanical shock applied every 30 seconds during the full 15 minutes test |
| BS EN 50200 PH30 | To comply with this standard a cable must retain continuity for 30 minutes under fire condition at 830 degrees C with a mechanical shock applied every 5 minutes during the full 30 minutes test |
| BS EN 60332 | To comply with this Flame Retardancy Standard a cable must self-extinguish leaving the upper cable sheath unaffected when a flame of 1kw of caloric power is applied for 30 seconds to it. This then demonstrates that the cable does not propagate fire. |
| BS EN 60754-1:2014 | To comply with this Zero Halogen standard a cable must have an Emission of less than 0.5% of corrosive & acid gas when under fire condition |
| EN 61034-2:2005:+A1:2013 | To comply with this Low Smoke standard a cable must be Meeting at least 60% for residual light transmission when under fire condition |
Sales Leaflet
View LeafletApproval Certificate
View CertificateRelated products
-
100 mtrs Reel ‘HP HIGH PERFORMANCE’ fire resistant cable 2 core, 1.5mm sq solid core, Red, meets BS5839 Pt1 2002 26.2d – 26.2d. LPCB approved
Quick ViewRead more100 mtrs Reel ‘XP PREMIUM’ fire resistant cable 2 core, 2.5mm sq solid core, Red, LPCB approved
#Context Plus
Follow us on Social Media
Quality Products
Manufacturers of fire alarm systems
100% Satisfaction
Advanced technology of smoke detection
Competitive Prices
Rock bottom prices guaranteed
Global Recognition
We supply to over 70 countries worldwide
